If you cannot find a suitable product, you can deepen your search using the Rotary Encoder finder, or contact us.
We would be happy to send you further product information or prepare a customized offer for you.
Didn't find what you were looking for?
ROTARY ENCODER ALTERNATIVES
You might also be interested in the following Rotary Encoders.
redundant
electronics
600 Ω
max. burden
< ± 0.15°
Typical accuracy
14-bit
Resolution Signal Output
2 x 4–20 mA
Signal output
2 x 4–20 mA
Power output
–
Voltage output
–
Bus exit
500 V, 50 Hz, 1 min
test voltage
Fixed adjustment
Signal alignment via
2 x 18 V–36 V DC
Feeding
< 70 mA
power consumption
0.1° / 10 K
Temperature coefficient
EN 61 000-6-2
Interference immunity
EN 61 000-6-4
Interference emission
'-40°C to +80°C
Temperature range
5810Z01
Article master number
Datasheet
100 mm
Housing diameter
Steel, galvanized, painted
Housing material
approx. 38 mm
Case length
IP69K, IP68
Enclosure protection class
without a wave
Wave material
ball bearings
shaft bearing
1
Maximum revolutions.
36.5 mm
Maximum rotation angle.
360°
Maximum rotation angle.
without a wave
shaft diameter
36.5 mm
Maximum revolutions.
50 g, 6 ms
shock
4 g sine wave, 5–100 Hz
vibration
Cable
Connection type
4 x M6 on TK 80 mm
fastening
50 g, 6 ms
life
Approval & functional safety
Side view left
Side view right
Front view
Mechanical data
Electrical data
encoder
MH-II-MU-GS100
Heavy-duty Rotary Encoder in flat design
The robust MH-II-MU-i-GS100 series Rotary Encoder features a flat steel housing with IP69K protection. Signal acquisition is performed using redundant Hall sensors and output via two opposing 4–20 mA current signals.
Flat design for use as a joint angle Rotary Encoder
IP protection IP69K, IP68
Redundant signal acquisition
RECOMMENDED FOR THE FOLLOWING
AREAS OF APPLICATION
100 mm
diameter
|
Single turn
_edited_edited.png)
Rotary Encoder
MH-II-MU-GS100
